How to choose the press according to the specific situation of refractory material factory?
Author: haloong Time: 2020-04-14 11:06:46
The development of The Times is changing with each passing day. Refractory industry, as the basic industry of national development, is facing the challenges in all aspects while obtaining the development opportunities.Refractory factory equipment selection has always been a refractory entrepreneurs more attention to the problem, then, how to choose the right press according to their own conditions? Here we present the suggestion for selection.
1,If the company has a large number of stable customers, the demand is large and stable, according to the output of the purchase of electric screw press, conditional enterprises can add hydraulic press.
2,Second, according to the product type of the purchase of the appropriate press tonnage, if the factory is mainly engaged in the production of converter brick, electric brick, the purchase of more 630T,1000T press, appropriate purchase of 400T; If the factory mainly produces ladle brick, then choose 400T, 630T press, appropriate choose 1000T press.
3,The company can purchase a press machine of 1200T or 1600T under the premise that the factory fund allows, so that it has obvious advantages in the production of products with a single weight of more than 40Kg, such as converter brick with a length of more than 850mm, impact plate,Ladle socket brick, converter export steel mouth and so on.
4,According to the actual production situation, if its full load production, the monthly output of 400T press is not less than 300 tons, the monthly output of 630T is not less than 400 tons, and the monthly output of 1000T machine is not less than 600 tons. According to their own contract situation reasonable purchase press.In the purchase of the press, must consider the production capacity, considering the press fault repair, maintenance and so on. The servo electric screw press produced by Haloong adopts fully sealed static pressure structure to effectively protect the press and reduce the failure rate of the equipment.
5,If it is on the basis of the old plant transformation, the former can be friction press converted into electric screw press, according to the hualong service of refractory factory renovation experience, if a press to full a year, its saving manpower cost and power cost can exceed its equipment renovation.
To sum up, the refractory material factory needs to reasonably purchase the press according to its own capacity, factory building, financial situation and long-term planning.
refractory working site