产品中心
The Advantages of Modified Friction Press
Zhengzhou Hualong mechanical research and development of friction press transformation technology using permanent magnet synchronous servo motor drive, is the first in the field of press transformation of the national patent certificate of the enterprise. Manual friction press after transformation to achieve single-stroke high and low speed free transition, all digital simulation manual operation; even hammer effect is good, a minute to 150 times; transmission chain short, reduce the wearing parts, thereby reducing equipment maintenance and repair costs; double brake, High safety factor; saving more than 55%. Using servo drive controller, precise control of brick thickness, fast response, run more smoothly. Automatic oil, butter independent lubrication system at the same time when the machine is equipped with an alarm when the oil shortage, to remind the operator to add in time. But also to achieve maintenance-free, to ensure the healthy operation of equipment, increase equipment life and reduce maintenance costs. After the transformation of the electric screw press without mechanical gearbox, no energy conversion, reduce the point of failure. Less wearing parts, simple operation, increase equipment life, reduce maintenance costs.
Manual friction presses to change the effect of electric screw press effect:
1. After the transformation of single-stroke high and low speed can be free to change, high efficiency.
2. To achieve digital control, complete simulation of manual operation, even hammer effect is good, 10 mm stroke 150 times / min, 50 mm stroke 66 times / min.
3. Refractory material molding products of high quality, continuous combat speed is very fast.
4. Product consistency is good, high pass rate.
5. Can suppress the specific bricks and 37 holes (including 37 holes) The following porous lattice brick, combined mold brick, for a variety of materials, a variety of brick production of better results.
6. Energy control is accurate, reduce the high degree of automation personnel.
7. Short drive chain, less wearing parts, thereby reducing equipment maintenance costs.
8. Energy efficient, save a person, saving 55%.
9. High safety factor, double brake and install emergency stop button.
10. stable performance, than the traditional motor and switched reluctance motor running more stable, low noise and high accuracy.
Manual friction presses to change the electric screw press is now a trend, the operation of the press after the transformation, save a lot of costs. To bring more benefits to the enterprise. Zhengzhou Hualong mechanical transformation of the press after the four safety protection system, the effective protection of artificial safety, less wearing parts, low maintenance costs.
