Technology

Refractory brick press adds new power for refractory machining

Author: haloong     Time: 2020-05-13 10:30:17

With the introduction of advanced technology and the continuous progress of China's science and technology, the development of China's refractory equipment technology has a great leap up.At present, China has developed a variety of advanced refractory brick making equipment, which not only reflects the development of China's mechanical engineering technology, but also make up for the shortage of China's refractory technology, for the development of China's refractory industry added unlimited power.

Refractory brick press is the most widely used refractory equipment in China, with high automation and high efficiency. Low labor intensity, multi-functional advantages, great development potential, good market prospects, is the country to promote the use of high quality firebrick machine equipment. So, do you know the production process of firebrick?

1, Raw material processing: the production of refractory brick raw materials (silica, clay, high bauxite, magnesite, etc.) generally need to go through ore dressing, crushing and screening, so that it can meet the production process standards of raw materials to carry out reasonable production.

2,Ingredients: the various raw materials of firebrick production are measured and proportioned in a reasonable way, and a certain proportion of water or other binder is added to make effective raw materials.

3,Mixing: mix the raw materials with a good ratio under the action of the wheel mill to achieve a uniform state of the materials.

4,Molding: Molding on the brick press,dry the formed brick, improve the strength of the brick, more convenient to install the kiln, conducive to the next step of sintering process can be carried out smoothly.

5. Drying: the formed brick is placed to dry to improve the strength of the brick and make it more convenient to install the kiln, which is conducive to the next step of sintering process.

6. Firing: the brick after drying is loaded into the tunnel kiln for sintering and maintenance, so as to improve the compressive strength and bending strength of the brick.

7. Inspection: the finished products of the bricks after the kiln shall be inspected, and mass production can be conducted only after the products are confirmed to be qualified.

8. Warehousing of finished products: the qualified products shall be transported to the finished products warehouse to complete the whole round of defective products. The defective products shall return to the first process and be processed with raw materials from the beginning.

refractory brick press working site

Online Message
  • Your Name:
  • * Your E-mail:
  • Your Tel:
  • * Content:
  • .